Bioshaker GBR-300
Large size constant temperature incubator shaker. Save your space with lift-up door, and stackable. Useable as laboratory table.
Applications
●Incubating microorganism such as E. Coli
●Incubating yeast and insect cells, psychrotroph
Features
Lift up door saves lab space.
Upon door lift, it comes about 30cm forward
Accepted “lift up door” which slide open vertical. Since it doesn’t need much front space to open, saves space. Shaking rack with conventional drawer type.
Energy saving operation function consumes 1/4 of power consumption
It saves energy by turning off freezer automatically when the setting temperature is 9ºC higher than environment.
It can be used as a side bench counter top when it is not stacked
Comparison to a common experimental bench.
Top board is the same material with bench. It can be used as temporary work bench area.
Stackable up to 2 levels
Even stacked, upper Shaking Rack is only about 113cm high.
Stacking installation up to 2 levels is possible.
Specifications
| Model | GBR-300 |
|---|---|
| Temperature Range | +4ºC – +80ºC |
| Temp. Control Accuracy | ±0.3ºC – 1.0ºC (*1) |
| Shaking Method | Switch orbital / Reciprocal |
| Shaking Speed | 25 – 300rpm (Shake below 200rpm when shaking on upper stack) |
| Amplitude | Switch 25/50mm (*2) |
| Dimensions of stand | 700 x 500mm (chamber dimension: 385mm) |
| Loading Limit | Approx. 10kg (exclude Shaking Rack) |
| Door Style | Lift up door |
| Surroundings temperature | +5ºC – +35ºC |
| Heating System | Heater (700W) |
| Cooling | Freezer (130W) |
| Display (Temp. and speed) | digital display |
| Programming Function | 4 pattern, 9 segment / temperature shaking speed time (for each segment) [time setting range: 00h00min – 99h59min], wait function (*3) |
| Safety device / function | Short/over current breaker, high temperature cutout switch, freezer high temperature cutting circuit, current limiter, overcurrent protection, fuse, filter check lamp, brake function on detection of shaking error, temperature error sensor, nonvolatile memory error, alarm for sample temperature protection (optional), door opening check, brake function on detection of motor overdrive (detection of abnormal pulse) |
| Dimensions | 1200 x 800 x 810Hmm (include top board) * dimension of top board = 1200 x 750 x 25Hmm |
| Weight | Approx. 235kg (*4) |
| Power Supply | AC100V 12A (*5) |
| Standard Accessory | Universal shaking rack (MT-7050, clamp sold separately) x 1, Phillips x 1, spacer board (t1.0/t2.0) x 2 each, cramp for stacking (*6) |
| (*1) Not include temperature change right after defrost function (electromagnetic valve switch) turned on. | |
| (*2) 50mm on factory shipment. If you want to change, please call TITEC service center. | |
| (*3) Wait function is start shaking after reaching the desired temperature. | |
| (*4) Since this machine is very heavy, please make sure the strength of floor. | |
| (*5) Allowable voltage fluctuation is ±5% for AC100V. | |
| (*6) Cramp for stacking will be attached for those who desire stack installation. Wheels are attached on deliver though they are just for carry and not attached. | |
Dimensions
