Water bath capable for Low water level with 45mm micro tubes and other small test tube. Optimum for examination. Stirring mehod (Jet flow, 4 level control).
●Various incubation such as enzyme reaction ●Inactivation of serum and thermal insulation of culture medium ●Hybridization
Addressed low water level (45mm) enables safety thermal insulation of container
Using at low temperature level is optimum for small container such as micro tube. There is no risk of turning over test tube which has low level of content since tube is not floating.
Safe working even at low water level
Temperature setting using Up-Down key, EXN-B has ON-OFF timer
Up-Down key can set temperature in unit of 0.1ºC. Setting temperature and actual temperature are digital display. EXN-B can be operated by ON-OFF timer and OFF-ON timer. EXN-B also has buzzer timer.
EXN-B can memorize three temperature settings.
EXN-B can memorize three temperature settings. By combination with ON/OFF/buzzer timer and temp. memory, EXN can perform three step simple program.
Becomes moist chamber using heat-proof plastic hood
With optional heat-proof plastic hood RF-SDM, take advantage of addressing low water level by speeding up temperature rise by 10 min and preventing evaporation. Furthermore it can be used as moist chamber which is useful for in situ hybridization.
Machine body and wetted surface material is stainless steel
This machine is durable and easy to maintain hygienically because machine body (except float switch) and wetted surface of attached thermal insulation tray B is made of stainless steel.
Two types of different temperature regulation accuracy and with or without timer
There are two models; standard model of SDN-B and EXN-B with higher accurate temperature regulation by one digit and has ON-OFF timer. They are specialized thermo minder for attached thermal insulation tray B and shaking water bath personal .
RT+5ºC - +70 ºC
-20℃ - +100℃ (*1)
Temp. Control Accuracy
±0.02ºC - 0.08 ºC
Minimum temperature setting unit
0.1ºC (setting and display)
Jet blast Flow control : 4 step (digital display)
Digital display Setting temperature (top panel) and inside chamber temperature (side panel)
Approx. 3kg (when using thermal insulation tray B: Approx. 6kg)
Safety device / function
Circuit protector (15A), fuse (2A), float type prohibition of boiling while empty Warning buzzer, misalignment high and low temperature error , lowing water, sensor error, auto tuning error, non-volatile storage error
280 x 109 x 215Hmm (when using Thermal insulation bath B-type: 280 x 475 x 240Hmm)
Thermal insulation bath B-type ×1 (*2)
(*1) Cooling machine such as "Cool pipe" is required for set below environmental temperature. Antifreezing solution is required for set below +7℃.
(*2) This production is specialized for Thermal insulation bath B-type (inner Dimensions 235 x 430 x 140Hmm). Other water bath cannot be used.